:::welcome to lautec :::

Left-right inserting type, a device that can mount and dismount roller with the stand and belt on, using horizontally-connected roller axis with inserting key

1. Designed to enable quick roller replacement underneath chute where it is impossible to change roller.
2. Improve the structure in a way so as not to allow any foreign substances between roller and the
supporting stand, thus prolonging the life span of roller.
3. During roller replacement work, it ensures a safe roller change without disassembling roller's external
fixing bolt.
4. Able to change many rollers in a short time.
5. Heighten operational efficiency with a shortened maintenance time.
6. Cost effective with staff reduction

<Carrier roller stand for chute>

<Separable carrier roller stand >

<Revival stand>

<Skew preventive return roller bracket roller>

Type	Belt width	Dimension												Weight (㎏)
Type	Belt width	￠D	L1	L2	M	n1	h1	Θ=30˚	Θ=35˚	Θ=45˚	Θ=30˚	Θ=35˚	Θ=45˚	Weight (㎏)
CRS-900	900	114.3	315	1240	1190	150	364	370	393	438	897	866	799	27.3
CRS-1050	1050	139.8	370	1390	1340	180	440	441	468	519	1053	1012	931	41.7
CRS-1200	1200	139.8	420	1570	1510	180	463	466	497	555	1190	1144	1052	45.7
CRS-1400	1400	165.2	500	1770	1740	250	564	589	626	514	1414	1361	1253	78.3
CRS-1600	1600	165.2	580	1990	1930	250	625	629	672	752	1633	1570	1446	92.0
CRS-1800	1800	165.2	650	2280	2220	280	694	694	742	832	1824	1757	1615	122.5
CRS-2000	2000	165.2	730	2420	2340	280	794	734	788	888	2043	1968	1808	134.5
CRS-2200	2200	165.2	800	2620	2540	300	789	794	853	963	2234	2152	1977	165.9

※ h1 is 30˚ standard scale (tolerance: ±2˚)
※ The above figure and table is subject to change without any prior notice due to the unforeseen circumstances